TECH TIPS

Snorkel Board Replacement Procedure

C-Tech’s Circuit Board is designed to meet the form, fit, and function of the original part and allows our customers to easily configure the board to replace 30403933040394, and 3040518 circuit boards.  Please contact C-Tech Technical Service at 877-755-7311 for help with any of our parts.  


To replace 3040518 or 3220073 circuit boards:

  1. Remove Brown Wire labeled 63Hz
  2. Remove both Blue Wires labeled “D”
  3. Mount Board to Joystick
  4. Connect Power Microswitch to plug from board (Red & Black Wires)
  5. Connect Receptacle from Board (Orange, Green, & Purple Wires) to Potentiometer PlugSnorkel Board Replacement Diagram
  6. Adjust Trim Potentiometers

 

To replace 3040393, 3040394, or 3220074 circuit boards:

  1. Remove both Blue Wires labeled “D”
  2. Mount Board to Joystick
  3. Connect Power Microswitch to plug from board (Red & Black Wires)
  4. Connect Receptacle from Board (Orange, Green, & Purple Wires) to Potentiometer Plug
  5. Adjust Trim Potentiometers

 

C-Tech offers a wide variety of Snorkel replacement parts, in addition to parts for JLG, Genie, SkyJack, MEC, and more! Our friendly and knowledgeable staff is available to help you select the correct Snorkel parts for your Snorkel boom or scissor lift via our toll-free helpline 1-888-755-7311, fax, email, or chat or shop on our secure website www.ctech-ind.com!